Kmc-controls MCP-8031 Series Bedienungsanleitung PDF herunterladen

Installation Guide

Damper Actuators for Terminal Boxes

MCP-8031 Series

Mounting

1. Connect the damper’s blade clip or drive arm

with the clevis pin and cotter pin.

2. Position the damper for its “normal” position.

3. Mount the actuator to the side of a VAV

terminal using the mounting holes in the

bracket.

4. Rotate actuator body so the air connection is in

the desired location.

5. Check that the linkage will not bind as the

shaft extends and retracts.

Connections

♦ Use 1/4" (6 mm) polyethylene tubing.

♦ Use only clean, dry control air. No attempt

should be made to use any other medium.

1. Pipe the signal (0 to 20 psi) to the input fitting.

2. Slowly apply supply pressure to fully stroke

the actuator and linkage.

3. Check for any binding.

Adjustments and Calibration

Fine tuning can be accomplished by adjusting the

balljoint on the pushrod.

Maintenance

The MCP-8031 actuator is designed for long term

reliability. No routine maintenance is required.

KMC Controls

19476 Industrial Drive

New Paris, IN 46553

574.831.5250

www. kmccontrols.com

002-019-01I

Installation Guide 1

Inhaltsverzeichnis

Seite 1 - Installation Guide

Installation GuideDamper Actuators for Terminal BoxesMCP-8031 SeriesMounting1. Connect the damper’s blade clip or drive armwith the clevis pin and cot

Kommentare zu diesen Handbüchern

Keine Kommentare

Kmc-controls MCP-8031 Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Kmc-controls MCP-8031 Series herunter. KMC Controls MCP-8031 Series User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Kmc-controls MCP-8031 Series