STE-6010/6011/6013/6015 Room Temperature Sensors 2 Installation Guide
STE-6013
STE-6011
Controller Connection
Connect wires as shown for the relevant model.
Thermistor (10K Ohms)
(Wires are
interchangeable)
Connecting an STE-6010/6015 to a KMC controller
requires a special cable with (on the sensor end) an
RJ-45 modular connector and (on the controller end)
an RJ-11 modular connector with additional wires for
KMC controller inputs. Purchasing pre-assembled
cables from KMC is more cost-eective and reliable
thancreatingcustomcablesintheeld.Useoneof
the following cables:
• KMD-5693 = 25 feet
• KMD-5694 = 50 feet
• KMD-5695 = 75 feet
The additional wire connections to the controller are:
• Orange is the thermistor signal to the controller’s
appropriate input
• Green is the optional 10 VDC supply voltage
from an output of a controller to the STE-6015
LED (for the STE-6010, clip or tape the unused
wire)
• Orange/white should be clipped or taped back
since a setpoint signal is not used with an STE-
6010/6015
NOTE: Pressingthepushbuon(ontheSTE-
6013/6015) momentarily shunts the
thermistor for a SENSORON signal (via the
C terminal or orange wire).
STE-6010/6015
KMD-5693 = 25 feet; KMD-5694 = 50 feet; KMD-5695 = 75 feet
1 8
Orange Wire = Thermistor Temperature Signal to Controller
Orange/White Wire = Not Used (cut or tape back)
12 inches
52
RJ-11 and
Wire Leads
to Controller
RJ-45
to STE
Sensor
Green Wire = 10 VDC Supply Voltage from Controller
(for STE-6015 only; cut or tape back for STE-6010)
RJ-11 RJ-45 Color
(Lead) 8 Orange
7 N.C.
(Lead) 6 Green
3 5 Blue
4 4 Blue/White
5 3 Green/White
2 N.C.
(Lead) 1 Orange/White
(Cables crossed, 20 AWG)
Common (“Ground”)
Thermistor (10K Ohms)
D
B
C
10 VDC LED Supply (from Controller)
(Override
Button)
Up (Toward Ceiling at Installation)
Maintenance
Careful installation will also ensure long-term
reliability and performance. Remove dust as neces-
saryfromholesintopandboom.Cleanwithasoft,
damp cloth and mild soap.
© 2013 KMC Controls, Inc. 866-019-03E
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
More Information
Model
Number
Interface
Features
Cable
Connections
Override
Button
LED
Status
Indicator
Screw
Clamp
Terminals
RJ-45
Connector
EIA-485
Data
Port
STE-6010 X X
STE-6011 X
STE-6013 X X X
STE-6015 X X X X
STE-6010/6011
STE-6013/6015
For mounting considerations, net-
work connection, controller con-
guration,programming,trouble-
shooting, and other information,
see the STE-6010/6011/6013/6015
Application Guide.
For general product information,
see the STE-6000 Series Room
Temperature Sensors/Transmit-
ters Data Sheet on the KMC
Controls web site.
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern